#define MAXUARTMSG	64
#define UARTBUFSIZE	101

#define GUARTGETDIV		0x11a00001	/* 4 */
#define GUARTSETDIV		0x11a00002	/* 4 vsoni */
#define GUARTGETBAUDBASE	0x11a00003	/* 4 */
#define GUARTGETRXINTERMSG	0x11a00005	/* 4 */
#define GUARTSETRXINTERMSG	0x11a00006	/* 4 */

#define GUARTGETMCR		0x11a00007	/* 1 */
#define GUARTSETMCR		0x11a00008	/* 1 */
#define		GUARTDTR		0x01
#define		GUARTRTS		0x02
#define		GUARTOUT1		0x04
#define		GUARTOUT2		0x08	/* warning - see below */
#define		GUARTLOOP		0x10	/* warning - see below */

/* 162550 uses the OUT2 bit in the modem control register as an extra	*/
/* interrupt enable even though it claims to be 16550 compatible.  As a	*/
/* work-around, the driver always sets the OUT2 bit on initialisation.	*/
/* Also note that you should always OR in 0x08 with the value you call	*/
/* GUARTSETMCR with, unless you know you've a real OUT2 output on your	*/
/* card and you need to clear it, or you know that your client software	*/
/* will never ever be used with 162550 based hardware or any other chip	*/
/* that may act similarly (there may well be others).  Refer to 16c2250	*/
/* datasheet.  Similarly, although this applies to all 16550 type	*/
/* UARTs, make sure you don't set the GUARTLOOP bit unless you really	*/
/* know what it does, and you really wanted to do it.			*/

#define GUARTGETRXMODE		0x11a00009	/* 1 */
#define GUARTSETRXMODE		0x11a0000a	/* 1 vsoni */
#define GUARTGETTXMODE		0x11a0000b	/* 1 */
#define GUARTSETTXMODE		0x11a0000c	/* 1 vsoni */
#define		GUARTMODETIME		0x01
#define		GUARTMODECHRYSLERMSCI	0x02


/***************************************************/
#ifdef FULLYDEVELOPEDUARTDRIVER

#define GUARTGETDATABITS
#define GUARTSETDATABITS

#define GUARTGETSTOP
#define GUARTSETSTOP
#define		GUARTSTOPONE
#define		GUARTSTOPTWO	/* see below */

/* With 16550 type UARTs GUARTSTOPTWO actually only gives one and a	*/
/* half stop bits whenever the number of data bits is set to five.	*/

#define GUARTGETPARITY
#define GUARTSETPARITY
#define		GUARTPARITYNONE
#define		GUARTPARITYODD
#define		GUARTPARITEVEN
#define		GUARTPARITYSTICKZERO
#define		GUARTPARITYSTICKONE

#endif
/***************************************************/

#define GUARTRXOVER	0x41
#define GUARTPARITY	0x42
#define GUARTFRAME	0x43
#define GUARTBREAK	0x44
#define GUARTGTIME	0x50
#define GSCIESCERR	0x71

#define GUARTSTAT_ERROR	0x01