 |
| Previous Issue | Unsubscribe | dgtech.com |
|
|
|
Visit DG Technologies at SAE 2011 World CongressSAE World Congress, "Innovators Only", is all new for 2011, with a new theme, "Charging Forward Together!", for next week's event April 12-14 to be held at Detroit's Cobo Center. Visit DG Technologies at Booth # 1019, where we will be showcasing our technology. Innovative solutions and related electric vehicle technologies will be the focus of the exhibitors, stressing both connectivity and applications. This year, in addition to the Exhibits, all attendees can attend all Technical Sessions & Keynotes, Leadership Center Sessions, and Innovation Forums. Besides our booth, DG representatives Richard D. Means and our CEO and SAE Board of Directors member Mark P. Zachos, along with Ford Motor Company's James Lawlis as the session's chair have organized Technical Session AE305 "In-Vehicle Networks" to be held Thursday morning, April 14th. This session, all about DG's expertise, vehicle networks, includes technical papers & presentations offering the latest developments and proposals for In-Vehicle Networks including:
|
The VSI-2534: Our J2534 Pass-Thru DeviceLowest Cost + Most Functionality = Best Value! The VSI-2534 is a SAE J2534 Standards Pass-Thru device, whose primary purpose is to program automotive ECUs (Electronic Control Units). It provides module programming for development, re-programming (reflashing), and end-of-line testing. The VSI-2534 is also useful for vehicle diagnostics, development, general design, hardware-in-the-loop simulation and provides for communications with any vehicle network. It is perfect for running the J1699 emissions compliance testing software required by the California Air Resources Board, CARB, and also provides a stable reference design during module development and testing. Also included with the VSI-2534 is a Software Development Kit, or SDK, a software and documentation set that is used to develop your own application using J2534 function calls. Using this intuitive user interface you can quickly:
For more information contact a sales representative by phone or email |
DG Technologies @ ETI ToolTech 2011DG Technologies will participate and exhibit at the Equipment and Tool Institute's (ETI) ToolTech, to be held May 4-5 in Miami Beach, Florida. ETI is a trade association of automotive tool and equipment manufacturers, technical information providers and training organizations which has served the automotive repair industry aftermarket for over 60 years. As an active full member of ETI, DG serves on their Scan Tool Group which is involved in vehicle network interface devices and telematics. This ToolTech conference represents a significant opportunity for companies like DG to promote themselves, including their capabilities and products, while networking with industry representatives that make, sell, represent or buy automotive tools and equipment. Attendees include OEMs, tool and equipment companies, national chain stores, large suppliers, dealer groups, distributors, manufacturer reps, and many other industry professionals. |
DG Technologies is growing, and is looking for additional quality representatives and distributors, globally. Contact Us |
Email Admin CenterThis newsletter is a service of DG Technologies. Should you no longer wish to receive these messages unsubscribe To ensure delivery of this newsletter to your inbox and to enable images to load in future mailings, please add kgriffin@dgtech.com to your e-mail address book or safe senders list. 33604 West Eight Mile Road - Farmington Hills, MI 48335 |