Software and Device Drivers

DPA Native Driver
The following native driver is needed to use API commands.
• DPA Native Device Driver – Version 8.55 (EXE, 2,548K) released 07/01/08
  

Dearborn Reprogramming (DR) Driver
The following DR driver for our DPA-4 USB device is a subset our RP1210 driver to increase the speed of Truck ECU reprogramming.
• DR Device Driver – Version 2.13 (EXE, 1,706K) released 09/18/08
  
• DR Device Driver Read Me file – Version 2.13
  Note: To purchase the RP1210 specification, contact the TMC at (703) 838-1763.

DPA RP1210 Driver
The following RP1210 driver is needed for Truck software.
• RP1210 Device Driver – Version 5.41 (EXE, 1,597K) released 07/01/08
  For the ISA and PC104 card DPA:
  
• RP1210 Device Driver – Version 5.41 (EXE, 2,048K) released 07/01/08
  Note: To purchase the RP1210 specification, contact the TMC at (703) 838-1763.

DPA DLL Version Search Software
This software is used to search the computer's hard drive and generate a text report of all the resident DPA DLL driver versions. This text report can be sent to Dearborn Group Technical Support for further diagnosis.
• DPA DLL driver reporting program – Version 1.01 (EXE, 17K) released 06/02/04
  DPA DLL driver reporting program – use instructions (TXT, 1K)

RP1210A Analyzer Software
The following FREE RP1210A Analyzer Software application interfaces with RP1210 drivers.
• RP1210a Analyzer – Version 1.5 (ZIP, 4,214K) updated 9/17/04
  See DPA Installation Notes

RP1210A Check DPA Application
The following Free DPA software tool uses RP1210A drivers to verify DPA communication.
• CheckDPA1210 New (EXE, 48K) released 2/26/08
  
• CheckDPA (Native Drivers) New (EXE, 52K) released 2/26/08
  

DPA Drivers for LabVIEW
The following Free DPA Drivers for LabVIEW is now available.
• DPA Drivers for LabVIEW: New (ZIP, 459K).

StoreDataLink
StoreDataLink is a stand-alone program that is included with, and works only with, the DPA-4 (including the DPA-4 Serial and USB versions, and also the DPA-RF Base Station). This program requires DPA-4 Firmware v33.12 or later.

The program is used to customize the DPA-4 power-up parameters so it can be used either in the Passenger Car or Truck & Bus market. The StoreDataLink program is used to define and set the data link defaults used by the DPA-4 during power-up. The StoreDataLink program writes the power-up parameters to the DPA-4 Flash Memory and only needs be done once.
• StoreDataLink Installation Program – Version 1.00 (ZIP, 4,318K)
  (This zipped file contains all the files needed to install this product)

Note: For previous software and driver versions, refer to the Archive Section of our Download page.