| LIN overview | A brief introduction to the LIN protocol. |
| Begin upload of LDF | Specify the name, size and description of an LDF to be uploaded. |
| Continue upload of LDF | Upload the LDF that has been specified. |
| List LDFs | List the LDFs that have been uploaded to the . |
| Delete an LDF | Delete an LDF on the by name. |
| Process an LDF | Parse (read) an LDF by name. All of the following commands are based on the information found in this LDF. |
| Get LDF info | Get the global information from the last parsed LDF. |
| Get node names | Get a list of all of the nodes. |
| Get node signals | Get a list of the signals published by a node. |
| Emulate nodes | Specify which nodes are to be emulated. |
| Get frames | Get a list of frame IDs and names. |
| Get frame info | Get information about a frame. |
| Get signal info | Get information about a signal including the name of the signal encoding used. |
| Get signal detail | Get information about a signal including the data for the signal encoding used. |
| Get encoding info | Get information about a signal encoding. |
| Get schedules | Get a list of schedule names. |
| Start schedule | Start a schedule. |
| Stop schedule | Stop a schedule. |
| Store data | Store the frame data by frame ID or name. |
| Send ID | Send a frame ID on the LIN bus. |
| Store data and send ID | Store the frame data and send the frame ID on the LIN bus. |
| Save session | Save the current LIN session for later restoration. |
| Restore session | Restore a previously saved LIN session. |