×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Automotive Ethernet Engineering Tools

Technica Engineering

Grid List

Set Descending Direction

5 Item(s)

  • ANDi

    • Message recording (logging) and signal analysis
    • Creating test cases
    • Residual bus simulations (RBS)
    • Bus systems and protocols supported
    • Standard Automotive Ethernet test
    Learn More
    Call For Quote

  • Media Converter (BroadCom Phy)

    • Converts Broadcom BroadR-Reach 100 MBit/s Fullduplex 1 x Twisted Pair unshielded to Fast Ethernet 100BaseTX Fullduplex 2 x Twisted Pair shielded or unshielded.
    • Broadcom BroadR-Reach Technology
    • Master / Slave configuration
    • HalfOut / FullOut configuration
    • Power requirement: 8 to 16 Volt DC, Power consumption: 2 Watt
    • Massive steel housing
    • Status LEDs
    • Configuration DIP switches
    • Automotive MQS connector included (Power, BroadR-Reach)
    • Standard Ethernet RJ45 connector
    • Size: 92 x 63 x 28 mm
    Learn More
    Call For Quote

  • Media Converter (NXP Phy)

    • Converts (100Base-T1) BroadR-Reach 100 MBit/s Fullduplex 1 x Twisted Pair unshielded to Fast Ethernet 100BaseTX Fullduplex 2 x Twisted Pair shielded or unshielded.
    • NXP BroadR-Reach Technology
    • Master / Slave configuration
    • HalfOut / FullOut configuration
    • Power requirement: 8 to 16 Volt DC, Power consumption: 2 Watt
    • Massive steel housing
    • Status LEDs
    • Configuration DIP switches
    • Automotive MQS connector included (Power, BroadR-Reach)
    • Standard Ethernet RJ45 connector
    • Size: 92 x 63 x 28 mm
    Learn More
    Call For Quote

  • Media Gateway

    FEATURES

    • 12 Ports (IEEE 100Base-T1) Broadcom BroadR-Reach (100 MBit/s Fullduplex on a single unshielded twisted pair)
    • 3 Ports Gigabit Ethernet
    • 1 SFP Port Gigabit Ethernet
    • 5 CAN Interfaces
    • 1 LIN Interface
    • 1 Flexray Interface
    • Automotive Tyco MQS Connectors for BroadR-Reach and Power Supply
    • Webserver for easy configuration: Master / Slave, HalfOut / FullOut, Port Forwarding, Port Mirroring, VLAN Tagging
    • WakeUp function by CAN Bus or Wakeline
    • Support of 802.1AS Protocol on all 12 x BroadR-Reach Ports
    • Several ADTF Filters available
    • Power output for attached devices: VBAT max. 1 Ampere in total
    • 19 Status LEDs
    • Possibility to reset to default settings by pushbutton
    • Robust steel case
    • Power requirement: 8 – 16 Volt DC, Power consumption: 8 Watt
    • Size: 195 x 143 x 33 mm
    Learn More
    Call For Quote

  • USB BroadR Converter

    • Converts Broadcom BroadR-Reach (IEEE 100Base-T1) 100 MBit/s full duplex 1x unshielded twisted pair (UTP) to USB
    • Broadcom BroadR-Reach Technology
    • Master/slave configuration through a windows tool
    • Power requirement: 5V DC provided from USB 2.0
    • Small size device as portable solution
    • Status LEDs
    • Automotive MQS connector included (BroadR-Reach)
    • Standard USB Connector
    • Size: 60 x 42 x 19mm
    Learn More
    Call For Quote

Grid List

Set Descending Direction

5 Item(s)