Showing 1–16 of 23 results
15 Foot USB Cable with Thumb Screws$29.00 Add to cart
PLC Cable$45.00 Add to cart
DPA to Volvo 14-Pin Round Connector Cable$89.00 Add to cart
J1962 OBDII Open Ended$89.00 Add to cart
DPA XL Volvo Construction 14-Pin Connector$89.00 Add to cart
DPA XL 9 pin Deutsch Adapter Cable$99.00 Add to cart
DPA XL & Automotive J1962 OBDII Adapter Cable$115.00 Add to cart
J1962 OBDII To DPA 5$124.00 Add to cart
J1939 Cummins Backbone Cable for DPA 5$124.00 Add to cart
DPA XL Cummins J1939 Backbone Connector$124.00 Add to cart
GMC TopKick/Kodiak Cable$125.00 Add to cart
J1962 OBDII Cable$129.00 Add to cart
Gryphon S3 Shared Cable$129.00 Add to cart
VSI-2534 Cable$129.00 Add to cart
DPA to Komatsu 12-pin Rectangle Connector$149.00 Add to cart
DPA to Volvo 8-Pin Rectangle Connector$149.00 Add to cart
0 thoughts on “Cables”
what is the difference between dpa5 and dpa5 pro?
The DPA 5 PRO offers the latest technology to communicate with all trucks on the road today. The DPA 5 is no longer available for purchase. For more detailed information, give us a call at (248) 888-2000 and ask for sales. Thank you!
Need pricing information
If you’d like to talk about special pricing, please give us a call at (248) 888-2000 and ask for sales. Thank you!
Is there a contact for Government Sales because I need the NSN for the DPA 5.
We’ve replaced the DPA 5 with the DPA 5 PRO. The Government NSN is 4910-01-689-2353, but there are special requirements for Government sales, please give us a call at (248) 888-2000. Thank you!
how can i buy dignostic software for isuzu and fusu for dpa5
Customers can purchase the manufacturer software directly in most cases, including Isuzu IDSS. Hope this helps, thank you!
I wanted to know if cnh dpa5 you sell it? If the dpa 5 pro has the same functions as cnh dpa5?
Our DPA 5 tools do not work with the CNH software. Please contact your nearest authorized CNH Industrial (Case IH or New Holland) dealer to purchase the hardware and software required.
Can this tool programme interchangeable control units and new units can it install the latest software for all vehicles can it reset and reprogrammed ecu’s and other control units
David, thank you for reaching out. Our tools are the most advanced in the market today. They are tested and communicate with more vehicles than any other tool. These diagnostic and reprogramming interface adapters that we offer will carry industry standard messages between OEM software and the vehicle for your reprogramming needs. The only limitations you will find are based on what the vehicle manufacturers allow you to do. To find out more about the software capabilities try starting at this page as a great reference starting point, https://www.dgtech.com/oem-service-websites/ or give us a call at 1-248-888-2000 and ask for sales.
Hi good afternoon please are need a kit with laptop please send me a quote up to Zambia
Hello,can we use dot pro for reprogramming ECM for RENAULT KERAX DXI and reprogramming ECM of MAN truch?
The DPA 5 PRO, https://www.dgtech.com/dpa5pro/ communicates with SAE J1939 CAN protocol and ATA RP1210. We recommend that you contact the truck manufacturers directly and ask if the vehicles you service will communicate with a tool such as the DPA 5 PRO using those communication protocols listed.
Hi,how much the softwares of trucks MAN,VOLVO,DAF,RENAULT,MERCEDES,CATERPILLAR per year and how much is the dpa5 pro with all connectors?
Please see our webstore here, https://www.dgtech.com/product-category/heavyduty/ for pricing on our products including the DPA 5 PRO and cables. We do not sell the manufacturer software, please ask them directly or we suggest you contact your local dealer.
When we read and erase DTC and test actuator and calibration any trucks use only dpa5pro software or manufactur software for this simple function?
These capabilities are actually quite complicated and complex from an embedded software and network message communication strategy view. We do offer a free diagnostic software application with our DPA 5 PRO kits that is called DG Diagnostics. This software will read and clear many diagnostic trouble codes but there are also many proprietary actions that you will probably want to do while servicing the brands of trucks that you listed. We recommend that you use the genuine manufacturer diagnostic software.
Maybe it would also be helpful if we have a local distributor for you to communicate with, you can check by looking at our list here, https://www.dgtech.com/distributors/
Need to know the ECCN classification and country of origin
Please tell me this device working with 24v
Please reference our resources tab, and user manuals for questions regarding this product. If you need further assistance, please contact DG Technologies at (248) 888-2000 or by emailing firstname.lastname@example.org. We would be happy to assist you further!
hello , we want 2pcs “DPA 5 PRO , if there any discount ?
There are currently no promotions offered at this current time, however, following DG Technologies on twitter (@DGTechnologies) and Facebook (@vehiclenetworksolutions) will keep you up to date on any future promotions we may offer! In the meantime, we are offering free ground shipping on our webstore.
Will this work on cummins isx? forced regen, ecm clear codes–reset?
Do you know if there are customs?
Parcel delivery to Greece.