We create unique system solutions
For products not currently listed on our store, call us at (248) 888-2000 for a quote.
The FlexMedia 100BASE-T1 is a converter for 100BASE-T1 to 100BASE-TX and vice versa. With the FlexMedia 100BASE-T1, it is possible to connect an automotive Ethernet network to a standard PC for testing or diagnostic purposes.
The FlexMedia 1000BASE-T1 is a converter for 1000BASE-T1 to 1000BASE-TX and vice versa. With the FlexMedia 1000BASE-T1, it is possible to connect an automotive Ethernet network to a standard PC for testing or diagnostic purposes.
FlexDevice-M is a robust electronic platform designed for use in the automotive environment. Due to the fact that the Flex-Device-M supports many bus systems and has variable interfaces, it could be used in different application fields.
The multifunctional bus control unit FlexDevice-L² supports the current and upcoming bus systems and has numerous variable interfaces, thus covering most of the application fields where bus interfaces are required
The FlexIO-S Thermo is a low-cost thermocouple measuring module which permits electrically isolated temperature measurement by evaluation of four type K thermocouples. The values can be transmitted onto the CAN bus for measurement data acquisition.
The multifunctional bus control unit FlexDevice-L supports the current and upcoming bus systems and has numerous variable interfaces, thus covering most of the application fields where bus interfaces are required.
The FlexSupply-S was designed for supplying measurement technology in test vehicles. Supply voltage drops caused by e.g. overlong lines to measurement technology components or the start-up process are effectively compensated.
FlexOpto is a bidirectional media converter which transmits electrical FlexRay, CAN or LIN signals via optical fibre.
This is a versatile, mobile, autonomous platform with which sensor data can be recorded, processed and generated. The FlexGen-M Sent reads out connected SENT sensors and simulates virtual sensors. The unit also provides various signal manipulation functions, such as to test the limit value behavior of specific connected control units
Development Board FlexDevel
The multifunctional bus control unit FlexDevice-S supports the current and upcoming bus systems and has one variable interface, so it covers most of the application fields where bus interfaces are required.
FlexConfig RBS is a software to generate a hardware assisted RBS and Gateways. Several network description formats are supported. The generated RBS runs independently on a separate hardware.
The FlexConfig Analyzer is an application for Android based devices for monitoring CAN, LIN and FlexRay buses. FlexConfig Analyzer is therefore the perfect complement to the WLAN and Bluetooth-enabled bus interface cards such as the FlexDevice-S / L / L² or the FlexCard Air-S.
The FlexCard USB-M, robust and powerful, is a multifunctional USB interface device for the analyzing and monitoring of CAN and FlexRay bus systems. One FlexRay Communication Controller is available in the FlexCard USB-M, including channel A and B.